Sirotin Šabac d.o.o. - za robu standardnih veličina i težina, trošak isporuke snosi Sirotin,
ako je porudžbina iznad 10000 RSD.
Posle Vaše porudžbine uvek prvo šaljemo ponudu.
Distributivni blokovi OJL 80A Morek
OJL distribution blocks are designed to branch conductors of larger cross-sections into conductors of smaller cross-sections with various design options, including nominal connection cross-sections of 2.5 mm² to 240 mm². They can be mounted on DIN rails or on flat, solid surfaces. Blocks marked AF a
Distributivni blokovi Morek Moblock 2P
Moblock distribution blocks are available in two-pole (up to 35 mm² and 125A) and four-pole (up to 50 mm² and 160A) versions. They feature insulated holders, a removable transparent cover and allow for convenient installation on DIN rails or panels. With brass conductive parts, galvanized steel conn
Distributivni blokovi Morek Moblock 4P
Distributivni blokovi do 160A, 50mm2, izolovani između faza.
Sertifikovani po standardima EN 60947-1 i EN 60947-7-1
Distributivni blokovi Morek OJL 135A - 400A
OJL distribution blocks are designed to branch conductors of larger cross-sections into conductors of smaller cross-sections with various design options, including nominal connection cross-sections of 2.5 mm² to 240 mm². They can be mounted on DIN rails or on flat, solid surfaces. Blocks marked AF a
Distributivni blokovi SLT
SLT distribution terminals are designed for copper and aluminum conductors with a cross-section of up to 50 mm² (Al) or 35 mm² (Cu). Multiple copper conductors can be placed in the terminals depending on the type. All terminals have 2, 3, 4 or 6 inputs and four types (SLT 50-2-1, SLT 50-3-2, SLT 50-
Glavne razvodne kleme, mesingane Morek
Univezalni brzo montirajući patent osigurava da se Razvodna klema može montirati horizontalno i vertikalno na 35 mm EN 50022 šinu bez potrebe za bilo kakvom izmenom.
Distributivni blokovi OJL 80A Morek
OJL distribution blocks are designed to branch conductors of larger cross-sections into conductors of smaller cross-sections with various design options, including nominal connection cross-sections of 2.5 mm² to 240 mm². They can be mounted on DIN rails or on flat, solid surfaces. Blocks marked AF and AFS are designed for connection (input) of flexible MOFLEX 10 x 25 mm buses or several 1 x 25 mm buses. The screws are tightened using a hex key. The blocks can be mounted on a standard DIN rail or on a solid, flat surface using screws. The AS and AFS models can be sealed with a cover. All types of OJL series blocks can be used in applications up to 1000 V AC/DC. The block body is made of tin-plated aluminum and the insulating sleeve is made of polyamide PA66. The maximum operating temperature is 80 °C and the degree of protection is IP20. These distribution blocks are certified according to EN 60947-7-1:2009 and EN 61238-1:2003 and meet the requirements of class A.
Blokovi za grananje provodnika.
-> 
