Početna Meni Sirotin Šabac zvanični distributer Schneider Electric kompanije

Sirotin Šabac d.o.o. - za robu standardnih veličina i težina, trošak isporuke snosi Sirotin, ako je porudžbina iznad 10000 RSD. Posle Vaše porudžbine uvek prvo šaljemo ponudu.

  • sirotin.rs > A klasa Stezaljke jedn... Pretraga kategorija Pretraga potkategorija

    • A klasa Stezaljke jednopolne jednostruke OTL Morek

    Universal OTL terminals are designed for copper and aluminum conductors. The terminals are suitable for all types of Cu or Al conductors with a cross-section of up to 300 mm² in applications up to 1000 V AC / 1500 V DC. Their use is very practical in places where copper and aluminum conductors are connected. Copper conductors can be placed in OTL terminals in multiple pieces according to the respective terminal type. Mounting is possible on a standard DIN rail or on a flat, solid surface. The terminals are available in gray, blue, yellow-green, red or black. The electrical part is made of tinned aluminum and the insulating part is made of polyamide PA66 (flammability class V-0 according to UL 94). The clamping part in the shape of a profile is specially milled to prevent the conductor from being pulled out. The clamping screws are made of tinned aluminum and their contact part is coated with contact paste. A hex socket wrench is required to tighten the clamping screw. The operating temperature is between -25 °C and +80 °C. The protection class of the OTL terminals is IP 20. These terminals are certified according to EN 60947-7-1:2009 and EN 61238-1:2003 and meet the requirements of class A. Univerzalne stezaljke OTL za bakarne i aluminijumske provodnike. Pogodne za provodnike do 240 mm². Klasa A, 5 Godina Garancije, Made in EU, UL94-V0 Sertifikati EN 61238-1:2003 i EN 60947-7-1:2009 Proizvedeno u Finskoj, 1000VAC / 1500VDC, 5 godina garancije
    Katalog

    Filteri

    Napon (V)

    Presek (mm²)

    -

    Resetuj filtere
    5 godina garancije MAA1016A10 MAA1016A10 OTL16 1xAl/Cu 1,5-16mm2 siva 1000V univerzalna stezaljka Universal OTL terminals are designed for copper and aluminum conductors. The terminals are suitable for all types of Cu or Al conductors with a cross-section of up to 300 mm² in applications up to 1000 V AC / 1500 V DC. Their use is very practical in places where copper and aluminum conductors are connected. Copper conductors can be placed in OTL terminals in multiple pieces according to the respective terminal type. Mounting is possible on a standard DIN rail or on a flat, solid surface. The terminals are available in gray, blue, yellow-green, red or black. The electrical part is made of tinned aluminum and the insulating part is made of polyamide PA66 (flammability class V-0 according to UL 94). The clamping part in the shape of a profile is specially milled to prevent the conductor from being pulled out. The clamping screws are made of tinned aluminum and their contact part is coated with contact paste. A hex socket wrench is required to tighten the clamping screw. The operating temperature is between -25 °C and +80 °C. The protection class of the OTL terminals is IP 20. These terminals are certified according to EN 60947-7-1:2009 and EN 61238-1:2003 and meet the requirements of class A. OTL univerzalne stezaljke (kleme) su napravljene za bakarne i aluminijumske provodnike. Kleme su pogodne za sve vrste bakarnih i aluminijumskih provodnika sa poprečnim presekom do 240 mm2. Više bakarnih provodnika može biti postavljeno na OTL klemu prema određenom tipu stezaljke (pogledati tabelu OTL ožičenja ispod). IP stepen zaštite OTL stezaljki je IP20.
    MAA1016A10 OTL16 1xAl/Cu 1,5-16mm2 siva 1000V univerzalna stezaljka
    Na lageru: 551
    Kupi
    5 godina garancije MAA1016B10 MAA1016B10 OTL16 1xAl/Cu 1,5-16mm2 plava 1000V univerzalana stezaljka Universal OTL terminals are designed for copper and aluminum conductors. The terminals are suitable for all types of Cu or Al conductors with a cross-section of up to 300 mm² in applications up to 1000 V AC / 1500 V DC. Their use is very practical in places where copper and aluminum conductors are connected. Copper conductors can be placed in OTL terminals in multiple pieces according to the respective terminal type. Mounting is possible on a standard DIN rail or on a flat, solid surface. The terminals are available in gray, blue, yellow-green, red or black. The electrical part is made of tinned aluminum and the insulating part is made of polyamide PA66 (flammability class V-0 according to UL 94). The clamping part in the shape of a profile is specially milled to prevent the conductor from being pulled out. The clamping screws are made of tinned aluminum and their contact part is coated with contact paste. A hex socket wrench is required to tighten the clamping screw. The operating temperature is between -25 °C and +80 °C. The protection class of the OTL terminals is IP 20. These terminals are certified according to EN 60947-7-1:2009 and EN 61238-1:2003 and meet the requirements of class A.
    MAA1016B10 OTL16 1xAl/Cu 1,5-16mm2 plava 1000V univerzalana stezaljka
    Na lageru: 122
    Kupi
    5 godina garancije MAA1016R10 MAA1016R10 OTL16 1xAl/Cu 1,5-16mm2 Crvena 1000V univerzalna stezaljka Universal OTL terminals are designed for copper and aluminum conductors. The terminals are suitable for all types of Cu or Al conductors with a cross-section of up to 300 mm² in applications up to 1000 V AC / 1500 V DC. Their use is very practical in places where copper and aluminum conductors are connected. Copper conductors can be placed in OTL terminals in multiple pieces according to the respective terminal type. Mounting is possible on a standard DIN rail or on a flat, solid surface. The terminals are available in gray, blue, yellow-green, red or black. The electrical part is made of tinned aluminum and the insulating part is made of polyamide PA66 (flammability class V-0 according to UL 94). The clamping part in the shape of a profile is specially milled to prevent the conductor from being pulled out. The clamping screws are made of tinned aluminum and their contact part is coated with contact paste. A hex socket wrench is required to tighten the clamping screw. The operating temperature is between -25 °C and +80 °C. The protection class of the OTL terminals is IP 20. These terminals are certified according to EN 60947-7-1:2009 and EN 61238-1:2003 and meet the requirements of class A.
    MAA1016R10 OTL16 1xAl/Cu 1,5-16mm2 Crvena 1000V univerzalna stezaljka
    Na lageru: 86
    Kupi
    5 godina garancije MAA1016S10 MAA1016S10 OTL16 1xAl/Cu 1,5-16mm2 crna 1000V univerzalna stezaljka Universal OTL terminals are designed for copper and aluminum conductors. The terminals are suitable for all types of Cu or Al conductors with a cross-section of up to 300 mm² in applications up to 1000 V AC / 1500 V DC. Their use is very practical in places where copper and aluminum conductors are connected. Copper conductors can be placed in OTL terminals in multiple pieces according to the respective terminal type. Mounting is possible on a standard DIN rail or on a flat, solid surface. The terminals are available in gray, blue, yellow-green, red or black. The electrical part is made of tinned aluminum and the insulating part is made of polyamide PA66 (flammability class V-0 according to UL 94). The clamping part in the shape of a profile is specially milled to prevent the conductor from being pulled out. The clamping screws are made of tinned aluminum and their contact part is coated with contact paste. A hex socket wrench is required to tighten the clamping screw. The operating temperature is between -25 °C and +80 °C. The protection class of the OTL terminals is IP 20. These terminals are certified according to EN 60947-7-1:2009 and EN 61238-1:2003 and meet the requirements of class A.
    MAA1016S10 OTL16 1xAl/Cu 1,5-16mm2 crna 1000V univerzalna stezaljka
    Na lageru: 91
    Kupi
    5 godina garancije MAA1016Y10 MAA1016Y10 OTL16 1xAl/Cu 1,5-16mm2 žuto/zelena 1000V univerzalna stezaljka Universal OTL terminals are designed for copper and aluminum conductors. The terminals are suitable for all types of Cu or Al conductors with a cross-section of up to 300 mm² in applications up to 1000 V AC / 1500 V DC. Their use is very practical in places where copper and aluminum conductors are connected. Copper conductors can be placed in OTL terminals in multiple pieces according to the respective terminal type. Mounting is possible on a standard DIN rail or on a flat, solid surface. The terminals are available in gray, blue, yellow-green, red or black. The electrical part is made of tinned aluminum and the insulating part is made of polyamide PA66 (flammability class V-0 according to UL 94). The clamping part in the shape of a profile is specially milled to prevent the conductor from being pulled out. The clamping screws are made of tinned aluminum and their contact part is coated with contact paste. A hex socket wrench is required to tighten the clamping screw. The operating temperature is between -25 °C and +80 °C. The protection class of the OTL terminals is IP 20. These terminals are certified according to EN 60947-7-1:2009 and EN 61238-1:2003 and meet the requirements of class A.
    MAA1016Y10 OTL16 1xAl/Cu 1,5-16mm2 žuto/zelena 1000V univerzalna stezaljka
    Na lageru: 155
    Kupi
    5 godina garancije MAA1035A10 MAA1035A10 OTL35 1xAl/Cu 2,5-35mm2 siva 1000V univerzalna stezaljka Universal OTL terminals are designed for copper and aluminum conductors. The terminals are suitable for all types of Cu or Al conductors with a cross-section of up to 300 mm² in applications up to 1000 V AC / 1500 V DC. Their use is very practical in places where copper and aluminum conductors are connected. Copper conductors can be placed in OTL terminals in multiple pieces according to the respective terminal type. Mounting is possible on a standard DIN rail or on a flat, solid surface. The terminals are available in gray, blue, yellow-green, red or black. The electrical part is made of tinned aluminum and the insulating part is made of polyamide PA66 (flammability class V-0 according to UL 94). The clamping part in the shape of a profile is specially milled to prevent the conductor from being pulled out. The clamping screws are made of tinned aluminum and their contact part is coated with contact paste. A hex socket wrench is required to tighten the clamping screw. The operating temperature is between -25 °C and +80 °C. The protection class of the OTL terminals is IP 20. These terminals are certified according to EN 60947-7-1:2009 and EN 61238-1:2003 and meet the requirements of class A.
    MAA1035A10 OTL35 1xAl/Cu 2,5-35mm2 siva 1000V univerzalna stezaljka
    Na lageru: 592
    Kupi
    5 godina garancije MAA1035B10 MAA1035B10 OTL35 1xAl/Cu 2,5-35mm2 plava 1000V univerzalna stezaljka Universal OTL terminals are designed for copper and aluminum conductors. The terminals are suitable for all types of Cu or Al conductors with a cross-section of up to 300 mm² in applications up to 1000 V AC / 1500 V DC. Their use is very practical in places where copper and aluminum conductors are connected. Copper conductors can be placed in OTL terminals in multiple pieces according to the respective terminal type. Mounting is possible on a standard DIN rail or on a flat, solid surface. The terminals are available in gray, blue, yellow-green, red or black. The electrical part is made of tinned aluminum and the insulating part is made of polyamide PA66 (flammability class V-0 according to UL 94). The clamping part in the shape of a profile is specially milled to prevent the conductor from being pulled out. The clamping screws are made of tinned aluminum and their contact part is coated with contact paste. A hex socket wrench is required to tighten the clamping screw. The operating temperature is between -25 °C and +80 °C. The protection class of the OTL terminals is IP 20. These terminals are certified according to EN 60947-7-1:2009 and EN 61238-1:2003 and meet the requirements of class A.
    MAA1035B10 OTL35 1xAl/Cu 2,5-35mm2 plava 1000V univerzalna stezaljka
    Na lageru: 74
    Kupi
    5 godina garancije MAA1035Y10 MAA1035Y10 OTL35 1xAl/Cu 2,5-35mm2 žuto/zelena 1000V univerzalna stezaljka Universal OTL terminals are designed for copper and aluminum conductors. The terminals are suitable for all types of Cu or Al conductors with a cross-section of up to 300 mm² in applications up to 1000 V AC / 1500 V DC. Their use is very practical in places where copper and aluminum conductors are connected. Copper conductors can be placed in OTL terminals in multiple pieces according to the respective terminal type. Mounting is possible on a standard DIN rail or on a flat, solid surface. The terminals are available in gray, blue, yellow-green, red or black. The electrical part is made of tinned aluminum and the insulating part is made of polyamide PA66 (flammability class V-0 according to UL 94). The clamping part in the shape of a profile is specially milled to prevent the conductor from being pulled out. The clamping screws are made of tinned aluminum and their contact part is coated with contact paste. A hex socket wrench is required to tighten the clamping screw. The operating temperature is between -25 °C and +80 °C. The protection class of the OTL terminals is IP 20. These terminals are certified according to EN 60947-7-1:2009 and EN 61238-1:2003 and meet the requirements of class A.
    MAA1035Y10 OTL35 1xAl/Cu 2,5-35mm2 žuto/zelena 1000V univerzalna stezaljka
    Na lageru: 73
    Kupi
    5 godina garancije MAA1050A10 MAA1050A10 OTL50 1xAl/Cu 1,5-50mm2 siva 1000V univerzalna stezaljka Universal OTL terminals are designed for copper and aluminum conductors. The terminals are suitable for all types of Cu or Al conductors with a cross-section of up to 300 mm² in applications up to 1000 V AC / 1500 V DC. Their use is very practical in places where copper and aluminum conductors are connected. Copper conductors can be placed in OTL terminals in multiple pieces according to the respective terminal type. Mounting is possible on a standard DIN rail or on a flat, solid surface. The terminals are available in gray, blue, yellow-green, red or black. The electrical part is made of tinned aluminum and the insulating part is made of polyamide PA66 (flammability class V-0 according to UL 94). The clamping part in the shape of a profile is specially milled to prevent the conductor from being pulled out. The clamping screws are made of tinned aluminum and their contact part is coated with contact paste. A hex socket wrench is required to tighten the clamping screw. The operating temperature is between -25 °C and +80 °C. The protection class of the OTL terminals is IP 20. These terminals are certified according to EN 60947-7-1:2009 and EN 61238-1:2003 and meet the requirements of class A.
    MAA1050A10 OTL50 1xAl/Cu 1,5-50mm2 siva 1000V univerzalna stezaljka
    Na lageru: 311
    Kupi
    5 godina garancije MAA1050B10 MAA1050B10 OTL50 1xAl/Cu 1,5-50mm2 plava 1000V univerzalna stezaljka Universal OTL terminals are designed for copper and aluminum conductors. The terminals are suitable for all types of Cu or Al conductors with a cross-section of up to 300 mm² in applications up to 1000 V AC / 1500 V DC. Their use is very practical in places where copper and aluminum conductors are connected. Copper conductors can be placed in OTL terminals in multiple pieces according to the respective terminal type. Mounting is possible on a standard DIN rail or on a flat, solid surface. The terminals are available in gray, blue, yellow-green, red or black. The electrical part is made of tinned aluminum and the insulating part is made of polyamide PA66 (flammability class V-0 according to UL 94). The clamping part in the shape of a profile is specially milled to prevent the conductor from being pulled out. The clamping screws are made of tinned aluminum and their contact part is coated with contact paste. A hex socket wrench is required to tighten the clamping screw. The operating temperature is between -25 °C and +80 °C. The protection class of the OTL terminals is IP 20. These terminals are certified according to EN 60947-7-1:2009 and EN 61238-1:2003 and meet the requirements of class A.
    MAA1050B10 OTL50 1xAl/Cu 1,5-50mm2 plava 1000V univerzalna stezaljka
    Na lageru: 112
    Kupi
    5 godina garancije MAA1050R10 MAA1050R10 OTL50 1xAl/Cu 1,5-50mm2 crvena 1000V univerzalna stezaljka Universal OTL terminals are designed for copper and aluminum conductors. The terminals are suitable for all types of Cu or Al conductors with a cross-section of up to 300 mm² in applications up to 1000 V AC / 1500 V DC. Their use is very practical in places where copper and aluminum conductors are connected. Copper conductors can be placed in OTL terminals in multiple pieces according to the respective terminal type. Mounting is possible on a standard DIN rail or on a flat, solid surface. The terminals are available in gray, blue, yellow-green, red or black. The electrical part is made of tinned aluminum and the insulating part is made of polyamide PA66 (flammability class V-0 according to UL 94). The clamping part in the shape of a profile is specially milled to prevent the conductor from being pulled out. The clamping screws are made of tinned aluminum and their contact part is coated with contact paste. A hex socket wrench is required to tighten the clamping screw. The operating temperature is between -25 °C and +80 °C. The protection class of the OTL terminals is IP 20. These terminals are certified according to EN 60947-7-1:2009 and EN 61238-1:2003 and meet the requirements of class A.
    MAA1050R10 OTL50 1xAl/Cu 1,5-50mm2 crvena 1000V univerzalna stezaljka
    Na lageru: 34
    Kupi
    5 godina garancije MAA1050S10 MAA1050S10 OTL50 1xAl/Cu 1,5-50mm2 crna 1000V univerzalna stezaljka Universal OTL terminals are designed for copper and aluminum conductors. The terminals are suitable for all types of Cu or Al conductors with a cross-section of up to 300 mm² in applications up to 1000 V AC / 1500 V DC. Their use is very practical in places where copper and aluminum conductors are connected. Copper conductors can be placed in OTL terminals in multiple pieces according to the respective terminal type. Mounting is possible on a standard DIN rail or on a flat, solid surface. The terminals are available in gray, blue, yellow-green, red or black. The electrical part is made of tinned aluminum and the insulating part is made of polyamide PA66 (flammability class V-0 according to UL 94). The clamping part in the shape of a profile is specially milled to prevent the conductor from being pulled out. The clamping screws are made of tinned aluminum and their contact part is coated with contact paste. A hex socket wrench is required to tighten the clamping screw. The operating temperature is between -25 °C and +80 °C. The protection class of the OTL terminals is IP 20. These terminals are certified according to EN 60947-7-1:2009 and EN 61238-1:2003 and meet the requirements of class A.
    MAA1050S10 OTL50 1xAl/Cu 1,5-50mm2 crna 1000V univerzalna stezaljka
    Na lageru: 57
    Kupi
    5 godina garancije MAA1050Y10 MAA1050Y10 OTL50 1xAl/Cu 1,5-50mm2 žuto/zelena 1000V univerzalna stezaljka Universal OTL terminals are designed for copper and aluminum conductors. The terminals are suitable for all types of Cu or Al conductors with a cross-section of up to 300 mm² in applications up to 1000 V AC / 1500 V DC. Their use is very practical in places where copper and aluminum conductors are connected. Copper conductors can be placed in OTL terminals in multiple pieces according to the respective terminal type. Mounting is possible on a standard DIN rail or on a flat, solid surface. The terminals are available in gray, blue, yellow-green, red or black. The electrical part is made of tinned aluminum and the insulating part is made of polyamide PA66 (flammability class V-0 according to UL 94). The clamping part in the shape of a profile is specially milled to prevent the conductor from being pulled out. The clamping screws are made of tinned aluminum and their contact part is coated with contact paste. A hex socket wrench is required to tighten the clamping screw. The operating temperature is between -25 °C and +80 °C. The protection class of the OTL terminals is IP 20. These terminals are certified according to EN 60947-7-1:2009 and EN 61238-1:2003 and meet the requirements of class A.
    MAA1050Y10 OTL50 1xAl/Cu 1,5-50mm2 žuto/zelena 1000V univerzalna stezaljka
    Na lageru: 35
    Kupi
    5 godina garancije MAA1095A10 MAA1095A10 OTL95 1xAl/Cu 6-95mm2 siva 1000V univerzalna stezaljka Universal OTL terminals are designed for copper and aluminum conductors. The terminals are suitable for all types of Cu or Al conductors with a cross-section of up to 300 mm² in applications up to 1000 V AC / 1500 V DC. Their use is very practical in places where copper and aluminum conductors are connected. Copper conductors can be placed in OTL terminals in multiple pieces according to the respective terminal type. Mounting is possible on a standard DIN rail or on a flat, solid surface. The terminals are available in gray, blue, yellow-green, red or black. The electrical part is made of tinned aluminum and the insulating part is made of polyamide PA66 (flammability class V-0 according to UL 94). The clamping part in the shape of a profile is specially milled to prevent the conductor from being pulled out. The clamping screws are made of tinned aluminum and their contact part is coated with contact paste. A hex socket wrench is required to tighten the clamping screw. The operating temperature is between -25 °C and +80 °C. The protection class of the OTL terminals is IP 20. These terminals are certified according to EN 60947-7-1:2009 and EN 61238-1:2003 and meet the requirements of class A.
    MAA1095A10 OTL95 1xAl/Cu 6-95mm2 siva 1000V univerzalna stezaljka
    Na lageru: 683
    Kupi
    5 godina garancije MAA1095B10 MAA1095B10 OTL95 1xAl/Cu 6-95mm2 plava 1000V univerzalna stezaljka Universal OTL terminals are designed for copper and aluminum conductors. The terminals are suitable for all types of Cu or Al conductors with a cross-section of up to 300 mm² in applications up to 1000 V AC / 1500 V DC. Their use is very practical in places where copper and aluminum conductors are connected. Copper conductors can be placed in OTL terminals in multiple pieces according to the respective terminal type. Mounting is possible on a standard DIN rail or on a flat, solid surface. The terminals are available in gray, blue, yellow-green, red or black. The electrical part is made of tinned aluminum and the insulating part is made of polyamide PA66 (flammability class V-0 according to UL 94). The clamping part in the shape of a profile is specially milled to prevent the conductor from being pulled out. The clamping screws are made of tinned aluminum and their contact part is coated with contact paste. A hex socket wrench is required to tighten the clamping screw. The operating temperature is between -25 °C and +80 °C. The protection class of the OTL terminals is IP 20. These terminals are certified according to EN 60947-7-1:2009 and EN 61238-1:2003 and meet the requirements of class A.
    MAA1095B10 OTL95 1xAl/Cu 6-95mm2 plava 1000V univerzalna stezaljka
    Na lageru: 388
    Kupi
    5 godina garancije MAA1095R10 MAA1095R10 OTL95 1xAl/Cu 6-95mm2 crvena 1000V univerzalna stezaljka Universal OTL terminals are designed for copper and aluminum conductors. The terminals are suitable for all types of Cu or Al conductors with a cross-section of up to 300 mm² in applications up to 1000 V AC / 1500 V DC. Their use is very practical in places where copper and aluminum conductors are connected. Copper conductors can be placed in OTL terminals in multiple pieces according to the respective terminal type. Mounting is possible on a standard DIN rail or on a flat, solid surface. The terminals are available in gray, blue, yellow-green, red or black. The electrical part is made of tinned aluminum and the insulating part is made of polyamide PA66 (flammability class V-0 according to UL 94). The clamping part in the shape of a profile is specially milled to prevent the conductor from being pulled out. The clamping screws are made of tinned aluminum and their contact part is coated with contact paste. A hex socket wrench is required to tighten the clamping screw. The operating temperature is between -25 °C and +80 °C. The protection class of the OTL terminals is IP 20. These terminals are certified according to EN 60947-7-1:2009 and EN 61238-1:2003 and meet the requirements of class A.
    MAA1095R10 OTL95 1xAl/Cu 6-95mm2 crvena 1000V univerzalna stezaljka
    Na lageru: 19
    Kupi
    5 godina garancije MAA1095S10 MAA1095S10 OTL95 1xAl/Cu 6-95mm2 crna 1000V univerzalna stezaljka Universal OTL terminals are designed for copper and aluminum conductors. The terminals are suitable for all types of Cu or Al conductors with a cross-section of up to 300 mm² in applications up to 1000 V AC / 1500 V DC. Their use is very practical in places where copper and aluminum conductors are connected. Copper conductors can be placed in OTL terminals in multiple pieces according to the respective terminal type. Mounting is possible on a standard DIN rail or on a flat, solid surface. The terminals are available in gray, blue, yellow-green, red or black. The electrical part is made of tinned aluminum and the insulating part is made of polyamide PA66 (flammability class V-0 according to UL 94). The clamping part in the shape of a profile is specially milled to prevent the conductor from being pulled out. The clamping screws are made of tinned aluminum and their contact part is coated with contact paste. A hex socket wrench is required to tighten the clamping screw. The operating temperature is between -25 °C and +80 °C. The protection class of the OTL terminals is IP 20. These terminals are certified according to EN 60947-7-1:2009 and EN 61238-1:2003 and meet the requirements of class A.
    MAA1095S10 OTL95 1xAl/Cu 6-95mm2 crna 1000V univerzalna stezaljka
    Na lageru: 21
    Kupi
    5 godina garancije MAA1095Y10 MAA1095Y10 OTL95 1xAl/Cu 6-95mm2 žuto/zelena 1000V univerzalna stezaljka Universal OTL terminals are designed for copper and aluminum conductors. The terminals are suitable for all types of Cu or Al conductors with a cross-section of up to 300 mm² in applications up to 1000 V AC / 1500 V DC. Their use is very practical in places where copper and aluminum conductors are connected. Copper conductors can be placed in OTL terminals in multiple pieces according to the respective terminal type. Mounting is possible on a standard DIN rail or on a flat, solid surface. The terminals are available in gray, blue, yellow-green, red or black. The electrical part is made of tinned aluminum and the insulating part is made of polyamide PA66 (flammability class V-0 according to UL 94). The clamping part in the shape of a profile is specially milled to prevent the conductor from being pulled out. The clamping screws are made of tinned aluminum and their contact part is coated with contact paste. A hex socket wrench is required to tighten the clamping screw. The operating temperature is between -25 °C and +80 °C. The protection class of the OTL terminals is IP 20. These terminals are certified according to EN 60947-7-1:2009 and EN 61238-1:2003 and meet the requirements of class A.
    MAA1095Y10 OTL95 1xAl/Cu 6-95mm2 žuto/zelena 1000V univerzalna stezaljka
    Na lageru: 161
    Kupi
    5 godina garancije MAA1150A10 MAA1150A10 OTL150 1xAl/Cu 25-150mm2 siva 1000V univerzalna stezaljka Universal OTL terminals are designed for copper and aluminum conductors. The terminals are suitable for all types of Cu or Al conductors with a cross-section of up to 300 mm² in applications up to 1000 V AC / 1500 V DC. Their use is very practical in places where copper and aluminum conductors are connected. Copper conductors can be placed in OTL terminals in multiple pieces according to the respective terminal type. Mounting is possible on a standard DIN rail or on a flat, solid surface. The terminals are available in gray, blue, yellow-green, red or black. The electrical part is made of tinned aluminum and the insulating part is made of polyamide PA66 (flammability class V-0 according to UL 94). The clamping part in the shape of a profile is specially milled to prevent the conductor from being pulled out. The clamping screws are made of tinned aluminum and their contact part is coated with contact paste. A hex socket wrench is required to tighten the clamping screw. The operating temperature is between -25 °C and +80 °C. The protection class of the OTL terminals is IP 20. These terminals are certified according to EN 60947-7-1:2009 and EN 61238-1:2003 and meet the requirements of class A.
    MAA1150A10 OTL150 1xAl/Cu 25-150mm2 siva 1000V univerzalna stezaljka
    Na lageru: 332
    Kupi
    5 godina garancije MAA1150B10 MAA1150B10 OTL150 1xAl/Cu 25-150mm2 plava 1000V univerzalna stezaljka Universal OTL terminals are designed for copper and aluminum conductors. The terminals are suitable for all types of Cu or Al conductors with a cross-section of up to 300 mm² in applications up to 1000 V AC / 1500 V DC. Their use is very practical in places where copper and aluminum conductors are connected. Copper conductors can be placed in OTL terminals in multiple pieces according to the respective terminal type. Mounting is possible on a standard DIN rail or on a flat, solid surface. The terminals are available in gray, blue, yellow-green, red or black. The electrical part is made of tinned aluminum and the insulating part is made of polyamide PA66 (flammability class V-0 according to UL 94). The clamping part in the shape of a profile is specially milled to prevent the conductor from being pulled out. The clamping screws are made of tinned aluminum and their contact part is coated with contact paste. A hex socket wrench is required to tighten the clamping screw. The operating temperature is between -25 °C and +80 °C. The protection class of the OTL terminals is IP 20. These terminals are certified according to EN 60947-7-1:2009 and EN 61238-1:2003 and meet the requirements of class A.
    MAA1150B10 OTL150 1xAl/Cu 25-150mm2 plava 1000V univerzalna stezaljka
    Na lageru: 53
    Kupi
    5 godina garancije MAA1150Y10 MAA1150Y10 OTL150 1xAl/Cu 25-150mm2 žuto/zelena 1000V univerzalna stezaljka Universal OTL terminals are designed for copper and aluminum conductors. The terminals are suitable for all types of Cu or Al conductors with a cross-section of up to 300 mm² in applications up to 1000 V AC / 1500 V DC. Their use is very practical in places where copper and aluminum conductors are connected. Copper conductors can be placed in OTL terminals in multiple pieces according to the respective terminal type. Mounting is possible on a standard DIN rail or on a flat, solid surface. The terminals are available in gray, blue, yellow-green, red or black. The electrical part is made of tinned aluminum and the insulating part is made of polyamide PA66 (flammability class V-0 according to UL 94). The clamping part in the shape of a profile is specially milled to prevent the conductor from being pulled out. The clamping screws are made of tinned aluminum and their contact part is coated with contact paste. A hex socket wrench is required to tighten the clamping screw. The operating temperature is between -25 °C and +80 °C. The protection class of the OTL terminals is IP 20. These terminals are certified according to EN 60947-7-1:2009 and EN 61238-1:2003 and meet the requirements of class A.
    MAA1150Y10 OTL150 1xAl/Cu 25-150mm2 žuto/zelena 1000V univerzalna stezaljka
    Na lageru: 38
    Kupi
    5 godina garancije MAA1240A10 MAA1240A10 OTL240 1xAl/Cu 35-240mm2 siva 1000V univerzalna stezaljka Universal OTL terminals are designed for copper and aluminum conductors. The terminals are suitable for all types of Cu or Al conductors with a cross-section of up to 300 mm² in applications up to 1000 V AC / 1500 V DC. Their use is very practical in places where copper and aluminum conductors are connected. Copper conductors can be placed in OTL terminals in multiple pieces according to the respective terminal type. Mounting is possible on a standard DIN rail or on a flat, solid surface. The terminals are available in gray, blue, yellow-green, red or black. The electrical part is made of tinned aluminum and the insulating part is made of polyamide PA66 (flammability class V-0 according to UL 94). The clamping part in the shape of a profile is specially milled to prevent the conductor from being pulled out. The clamping screws are made of tinned aluminum and their contact part is coated with contact paste. A hex socket wrench is required to tighten the clamping screw. The operating temperature is between -25 °C and +80 °C. The protection class of the OTL terminals is IP 20. These terminals are certified according to EN 60947-7-1:2009 and EN 61238-1:2003 and meet the requirements of class A.
    MAA1240A10 OTL240 1xAl/Cu 35-240mm2 siva 1000V univerzalna stezaljka
    Na lageru: 33
    Kupi
    5 godina garancije MAA1240B10 MAA1240B10 OTL240 1xAl/Cu 35-240mm2 plava 1000V univerzalna stezaljka Universal OTL terminals are designed for copper and aluminum conductors. The terminals are suitable for all types of Cu or Al conductors with a cross-section of up to 300 mm² in applications up to 1000 V AC / 1500 V DC. Their use is very practical in places where copper and aluminum conductors are connected. Copper conductors can be placed in OTL terminals in multiple pieces according to the respective terminal type. Mounting is possible on a standard DIN rail or on a flat, solid surface. The terminals are available in gray, blue, yellow-green, red or black. The electrical part is made of tinned aluminum and the insulating part is made of polyamide PA66 (flammability class V-0 according to UL 94). The clamping part in the shape of a profile is specially milled to prevent the conductor from being pulled out. The clamping screws are made of tinned aluminum and their contact part is coated with contact paste. A hex socket wrench is required to tighten the clamping screw. The operating temperature is between -25 °C and +80 °C. The protection class of the OTL terminals is IP 20. These terminals are certified according to EN 60947-7-1:2009 and EN 61238-1:2003 and meet the requirements of class A.
    MAA1240B10 OTL240 1xAl/Cu 35-240mm2 plava 1000V univerzalna stezaljka
    Na lageru: 77
    Kupi
    5 godina garancije MAA1240Y10 MAA1240Y10 OTL240 1xAl/Cu 35-240mm2 žuto/zelena 1000V univerzalna stezaljka Universal OTL terminals are designed for copper and aluminum conductors. The terminals are suitable for all types of Cu or Al conductors with a cross-section of up to 300 mm² in applications up to 1000 V AC / 1500 V DC. Their use is very practical in places where copper and aluminum conductors are connected. Copper conductors can be placed in OTL terminals in multiple pieces according to the respective terminal type. Mounting is possible on a standard DIN rail or on a flat, solid surface. The terminals are available in gray, blue, yellow-green, red or black. The electrical part is made of tinned aluminum and the insulating part is made of polyamide PA66 (flammability class V-0 according to UL 94). The clamping part in the shape of a profile is specially milled to prevent the conductor from being pulled out. The clamping screws are made of tinned aluminum and their contact part is coated with contact paste. A hex socket wrench is required to tighten the clamping screw. The operating temperature is between -25 °C and +80 °C. The protection class of the OTL terminals is IP 20. These terminals are certified according to EN 60947-7-1:2009 and EN 61238-1:2003 and meet the requirements of class A.
    MAA1240Y10 OTL240 1xAl/Cu 35-240mm2 žuto/zelena 1000V univerzalna stezaljka
    Na lageru: 64
    Kupi
    5 godina garancije MAA1300A10 MAA1300A10 OTL300-1 siva 1xAl/Cu 95-300mm² 1000V Univerzalna stezaljka Universal OTL terminals are designed for copper and aluminum conductors. The terminals are suitable for all types of Cu or Al conductors with a cross-section of up to 300 mm² in applications up to 1000 V AC / 1500 V DC. Their use is very practical in places where copper and aluminum conductors are connected. Copper conductors can be placed in OTL terminals in multiple pieces according to the respective terminal type. Mounting is possible on a standard DIN rail or on a flat, solid surface. The terminals are available in gray, blue, yellow-green, red or black. The electrical part is made of tinned aluminum and the insulating part is made of polyamide PA66 (flammability class V-0 according to UL 94). The clamping part in the shape of a profile is specially milled to prevent the conductor from being pulled out. The clamping screws are made of tinned aluminum and their contact part is coated with contact paste. A hex socket wrench is required to tighten the clamping screw. The operating temperature is between -25 °C and +80 °C. The protection class of the OTL terminals is IP 20. These terminals are certified according to EN 60947-7-1:2009 and EN 61238-1:2003 and meet the requirements of class A. Morek siva univerzalna stezaljka 95-300mm² Nominalni napon 1000 V AC / 1500 V DC Nominalna struja 490 (Cu) / 440 (Al) A UL94 V0 Dužina 106mm² Širina 44mm² Visina 71mm²
    MAA1300A10 OTL300-1 siva 1xAl/Cu 95-300mm² 1000V Univerzalna stezaljka
    Na lageru: 6
    Kupi
    5 godina garancije MAA1300B10 MAA1300B10 OTL300-1 plava 1xAl/Cu 95-300mm² 1000V Univerzalna stezaljka Universal OTL terminals are designed for copper and aluminum conductors. The terminals are suitable for all types of Cu or Al conductors with a cross-section of up to 300 mm² in applications up to 1000 V AC / 1500 V DC. Their use is very practical in places where copper and aluminum conductors are connected. Copper conductors can be placed in OTL terminals in multiple pieces according to the respective terminal type. Mounting is possible on a standard DIN rail or on a flat, solid surface. The terminals are available in gray, blue, yellow-green, red or black. The electrical part is made of tinned aluminum and the insulating part is made of polyamide PA66 (flammability class V-0 according to UL 94). The clamping part in the shape of a profile is specially milled to prevent the conductor from being pulled out. The clamping screws are made of tinned aluminum and their contact part is coated with contact paste. A hex socket wrench is required to tighten the clamping screw. The operating temperature is between -25 °C and +80 °C. The protection class of the OTL terminals is IP 20. These terminals are certified according to EN 60947-7-1:2009 and EN 61238-1:2003 and meet the requirements of class A. Morek plava univerzalna stezaljka 95-300mm² Nominalni napon 1000 V AC / 1500 V DC Nominalna struja 490 (Cu) / 440 (Al) A UL94 V0 Dužina 106mm² Širina 44mm² Visina 71mm²
    MAA1300B10 OTL300-1 plava 1xAl/Cu 95-300mm² 1000V Univerzalna stezaljka
    Na lageru: 3
    Kupi
    5 godina garancije MAA1300R10 MAA1300R10 OTL300-1 crvena 1xAl/Cu 95-300mm² 1000V Univerzalna stezaljka Universal OTL terminals are designed for copper and aluminum conductors. The terminals are suitable for all types of Cu or Al conductors with a cross-section of up to 300 mm² in applications up to 1000 V AC / 1500 V DC. Their use is very practical in places where copper and aluminum conductors are connected. Copper conductors can be placed in OTL terminals in multiple pieces according to the respective terminal type. Mounting is possible on a standard DIN rail or on a flat, solid surface. The terminals are available in gray, blue, yellow-green, red or black. The electrical part is made of tinned aluminum and the insulating part is made of polyamide PA66 (flammability class V-0 according to UL 94). The clamping part in the shape of a profile is specially milled to prevent the conductor from being pulled out. The clamping screws are made of tinned aluminum and their contact part is coated with contact paste. A hex socket wrench is required to tighten the clamping screw. The operating temperature is between -25 °C and +80 °C. The protection class of the OTL terminals is IP 20. These terminals are certified according to EN 60947-7-1:2009 and EN 61238-1:2003 and meet the requirements of class A. Morek crvena univerzalna stezaljka 95-300mm² Nominalni napon 1000 V AC / 1500 V DC Nominalna struja 490 (Cu) / 440 (Al) A UL94 V0 Dužina 106mm² Širina 44mm² Visina 71mm²
    MAA1300R10 OTL300-1 crvena 1xAl/Cu 95-300mm² 1000V Univerzalna stezaljka
    Proveriti rok isporuke
    Kupi
    5 godina garancije MAA1300S10 MAA1300S10 OTL300-1 crna 1xAl/Cu 95-300mm² 1000V Univerzalna stezaljka Universal OTL terminals are designed for copper and aluminum conductors. The terminals are suitable for all types of Cu or Al conductors with a cross-section of up to 300 mm² in applications up to 1000 V AC / 1500 V DC. Their use is very practical in places where copper and aluminum conductors are connected. Copper conductors can be placed in OTL terminals in multiple pieces according to the respective terminal type. Mounting is possible on a standard DIN rail or on a flat, solid surface. The terminals are available in gray, blue, yellow-green, red or black. The electrical part is made of tinned aluminum and the insulating part is made of polyamide PA66 (flammability class V-0 according to UL 94). The clamping part in the shape of a profile is specially milled to prevent the conductor from being pulled out. The clamping screws are made of tinned aluminum and their contact part is coated with contact paste. A hex socket wrench is required to tighten the clamping screw. The operating temperature is between -25 °C and +80 °C. The protection class of the OTL terminals is IP 20. These terminals are certified according to EN 60947-7-1:2009 and EN 61238-1:2003 and meet the requirements of class A. Morek crna univerzalna stezaljka 95-300mm² Nominalni napon 1000 V AC / 1500 V DC Nominalna struja 490 (Cu) / 440 (Al) A UL94 V0 Dužina 106mm² Širina 44mm² Visina 71mm²
    MAA1300S10 OTL300-1 crna 1xAl/Cu 95-300mm² 1000V Univerzalna stezaljka
    Proveriti rok isporuke
    Kupi
    5 godina garancije MAA1300Y10 MAA1300Y10 OTL300-1 ž-z 1xAl/Cu 95-300mm² 1000V Univerzalna stezaljka Universal OTL terminals are designed for copper and aluminum conductors. The terminals are suitable for all types of Cu or Al conductors with a cross-section of up to 300 mm² in applications up to 1000 V AC / 1500 V DC. Their use is very practical in places where copper and aluminum conductors are connected. Copper conductors can be placed in OTL terminals in multiple pieces according to the respective terminal type. Mounting is possible on a standard DIN rail or on a flat, solid surface. The terminals are available in gray, blue, yellow-green, red or black. The electrical part is made of tinned aluminum and the insulating part is made of polyamide PA66 (flammability class V-0 according to UL 94). The clamping part in the shape of a profile is specially milled to prevent the conductor from being pulled out. The clamping screws are made of tinned aluminum and their contact part is coated with contact paste. A hex socket wrench is required to tighten the clamping screw. The operating temperature is between -25 °C and +80 °C. The protection class of the OTL terminals is IP 20. These terminals are certified according to EN 60947-7-1:2009 and EN 61238-1:2003 and meet the requirements of class A. Morek žuto-zelena univerzalna stezaljka 95-300mm² Nominalni napon 1000 V AC / 1500 V DC Nominalna struja 490 (Cu) / 440 (Al) A UL94 V0 Dužina 106mm² Širina 44mm² Visina 71mm²
    MAA1300Y10 OTL300-1 ž-z 1xAl/Cu 95-300mm² 1000V Univerzalna stezaljka
    Na lageru: 3
    Kupi

    Pošaljite upit za


    Korpa - 0
    Do dodavanja u korpu sve cene su sa PDV-om.
    Vaša korpa je prazna
    sirotin.rs koristi kolačiće. Daljim korišćenjem veb adrese sirotin.rs saglasni ste sa korišćenjem kolačića na istoj adresi.
    Positive SSL
    Essential SSL Search icons created by Maxim Basinski Premium - Flaticon Cost effectiveness icons created by Freepik - Flaticon