Sirotin Šabac d.o.o. - za robu standardnih veličina i težina, trošak isporuke snosi Sirotin,
ako je porudžbina iznad 10000 RSD.
Posle Vaše porudžbine uvek prvo šaljemo ponudu.
Ol konektori za rad u teškim uslovima OL Morek
OL connection terminals are designed for connecting copper and aluminum conductors with a nominal cross-section from 6 to 2 x 300 mm 2. OL connection terminals are used to connect one or two conductors. The individual parts of the terminal are made of stainless steel (yoke), copper (bridge) and stee
SR Konektori za uređaje Morek
SR reducing terminals are designed for reducing the connection cross-sections of Cu and Al conductors in fuses, control and other devices. Depending on the dimensions of the connection holes of the devices and the supply cross-section of the conductor, a suitable reducing terminal can be selected. T
OT konektori univerzalni 690V Morek
Univerzalne stezaljke OT se koriste za povezivanje bakarnih i aluminijumskih provodnika sa sabirnicom. Konektori omogućavaju povezivanje jednog ili dva provodnika.
OTH konektori univerzalni OTH 800-1250V Morek
OTH connection terminals are used for connecting copper and aluminum conductors to devices. OTH terminals allow the connection of two, three or four conductors up to a cross-section of 300 mm2. It is also possible to connect an indication conductor with a cross-section of 1.5-4 mm2. Compact, econom
Konektori za fotonaponske panele Morek
Press connectors for photovoltaic applications are designed for long-term outdoor use and are compatible with MC-4 connectors. Advantages • For conductors 4 ÷ 10 mm2 • Rated voltage 1500 VDC • Rated input current 40 A / 62 A • MC-4 standard • Protection class IP 68 • Easy disconnection without tools
OLI univerzalni konektor za teške uslove Morek
OLI connection terminals in an insulating sleeve are designed for connecting copper and aluminum conductors with a nominal cross-section from 6 to 300 mm2. The terminals are used to connect copper or aluminum cables with flexible busbars or cables with eyes. The individual parts are made of stainles
Ol konektori za rad u teškim uslovima OL Morek
OL connection terminals are designed for connecting copper and aluminum conductors with a nominal cross-section from 6 to 2 x 300 mm 2. OL connection terminals are used to connect one or two conductors. The individual parts of the terminal are made of stainless steel (yoke), copper (bridge) and steel (screw). These terminals are designed for heavy duty use. The terminals allow the clamping of stranded conductors without the need to modify the ends (clamping with the flat washer, not with the point surface of the screw). Can be installed without the use of special tools.
Konektori za rad u teškim uslovima OL su namenjeni za
povezivanje bakarnih i aluminijumskih provodnika poprečnog preseka od 6 do 2 x 300 mm². Namenjeni su za povezivanje jednog ili dva provodnika
-> 
