Početna Meni Sirotin Šabac zvanični distributer Schneider Electric kompanije

Sirotin Šabac d.o.o. - za robu standardnih veličina i težina, trošak isporuke snosi Sirotin, ako je porudžbina iznad 10000 RSD. Posle Vaše porudžbine uvek prvo šaljemo ponudu.

  • sirotin.rs > A klasa Stezaljke jedn... Pretraga kategorija Pretraga potkategorija

    • A klasa Stezaljke jednopolne OTL dvostruke Morek

    Universal OTL terminals are designed for copper and aluminum conductors. The terminals are suitable for all types of Cu or Al conductors with a cross-section of up to 300 mm² in applications up to 1000 V AC / 1500 V DC. Their use is very practical in places where copper and aluminum conductors are connected. Copper conductors can be placed in OTL terminals in multiple pieces according to the respective terminal type. Mounting is possible on a standard DIN rail or on a flat, solid surface. The terminals are available in gray, blue, yellow-green, red or black. The electrical part is made of tinned aluminum and the insulating part is made of polyamide PA66 (flammability class V-0 according to UL 94). The clamping part in the shape of a profile is specially milled to prevent the conductor from being pulled out. The clamping screws are made of tinned aluminum and their contact part is coated with contact paste. A hex socket wrench is required to tighten the clamping screw. The operating temperature is between -25 °C and +80 °C. The protection class of the OTL terminals is IP 20. These terminals are certified according to EN 60947-7-1:2009 and EN 61238-1:2003 and meet the requirements of class A. Univerzalne stezaljke OTL za bakarne i aluminijumske provodnike. Pogodne za provodnike do 240 mm². Klasa A, 5 Godina Garancije, Made in EU, UL94-V0 Sertifikati EN 61238-1:2003 i EN 60947-7-1:2009 Proizvedeno u Finskoj, 1000VAC / 1500VDC, 5 godina garancije
    Katalog

    Filteri

    Napon (V)

    Presek (mm²)

    Polovi

    -

    Resetuj filtere
    5 godina garancije MAA2035A10 MAA2035A10 Stezaljka ( klema ) dvostruka OTL 35-2 siva 2xAl/Cu 2,5-35mm Universal OTL terminals are designed for copper and aluminum conductors. The terminals are suitable for all types of Cu or Al conductors with a cross-section of up to 300 mm² in applications up to 1000 V AC / 1500 V DC. Their use is very practical in places where copper and aluminum conductors are connected. Copper conductors can be placed in OTL terminals in multiple pieces according to the respective terminal type. Mounting is possible on a standard DIN rail or on a flat, solid surface. The terminals are available in gray, blue, yellow-green, red or black. The electrical part is made of tinned aluminum and the insulating part is made of polyamide PA66 (flammability class V-0 according to UL 94). The clamping part in the shape of a profile is specially milled to prevent the conductor from being pulled out. The clamping screws are made of tinned aluminum and their contact part is coated with contact paste. A hex socket wrench is required to tighten the clamping screw. The operating temperature is between -25 °C and +80 °C. The protection class of the OTL terminals is IP 20. These terminals are certified according to EN 60947-7-1:2009 and EN 61238-1:2003 and meet the requirements of class A.
    MAA2035A10 Stezaljka ( klema ) dvostruka OTL 35-2 siva 2xAl/Cu 2,5-35mm
    Na lageru: 225
    Kupi
    5 godina garancije MAA2035B10 MAA2035B10 Stezaljka ( klema ) dvostruka OTL 35-2 plav 2xAl/Cu 2,5-35mm Universal OTL terminals are designed for copper and aluminum conductors. The terminals are suitable for all types of Cu or Al conductors with a cross-section of up to 300 mm² in applications up to 1000 V AC / 1500 V DC. Their use is very practical in places where copper and aluminum conductors are connected. Copper conductors can be placed in OTL terminals in multiple pieces according to the respective terminal type. Mounting is possible on a standard DIN rail or on a flat, solid surface. The terminals are available in gray, blue, yellow-green, red or black. The electrical part is made of tinned aluminum and the insulating part is made of polyamide PA66 (flammability class V-0 according to UL 94). The clamping part in the shape of a profile is specially milled to prevent the conductor from being pulled out. The clamping screws are made of tinned aluminum and their contact part is coated with contact paste. A hex socket wrench is required to tighten the clamping screw. The operating temperature is between -25 °C and +80 °C. The protection class of the OTL terminals is IP 20. These terminals are certified according to EN 60947-7-1:2009 and EN 61238-1:2003 and meet the requirements of class A.
    MAA2035B10 Stezaljka ( klema ) dvostruka OTL 35-2 plav 2xAl/Cu 2,5-35mm
    Na lageru: 100
    Kupi
    5 godina garancije MAA2035Y10 MAA2035Y10 Stezaljka ( klema ) dvostruka OTL 35-2 zu/z 2xAl/Cu 2,5-35mm Universal OTL terminals are designed for copper and aluminum conductors. The terminals are suitable for all types of Cu or Al conductors with a cross-section of up to 300 mm² in applications up to 1000 V AC / 1500 V DC. Their use is very practical in places where copper and aluminum conductors are connected. Copper conductors can be placed in OTL terminals in multiple pieces according to the respective terminal type. Mounting is possible on a standard DIN rail or on a flat, solid surface. The terminals are available in gray, blue, yellow-green, red or black. The electrical part is made of tinned aluminum and the insulating part is made of polyamide PA66 (flammability class V-0 according to UL 94). The clamping part in the shape of a profile is specially milled to prevent the conductor from being pulled out. The clamping screws are made of tinned aluminum and their contact part is coated with contact paste. A hex socket wrench is required to tighten the clamping screw. The operating temperature is between -25 °C and +80 °C. The protection class of the OTL terminals is IP 20. These terminals are certified according to EN 60947-7-1:2009 and EN 61238-1:2003 and meet the requirements of class A.
    MAA2035Y10 Stezaljka ( klema ) dvostruka OTL 35-2 zu/z 2xAl/Cu 2,5-35mm
    Na lageru: 60
    Kupi
    5 godina garancije MAA2050A10 MAA2050A10 Stezaljka ( klema ) dvostruka OTL 50-2 siva 2xAl/Cu 1,5-50mm Universal OTL terminals are designed for copper and aluminum conductors. The terminals are suitable for all types of Cu or Al conductors with a cross-section of up to 300 mm² in applications up to 1000 V AC / 1500 V DC. Their use is very practical in places where copper and aluminum conductors are connected. Copper conductors can be placed in OTL terminals in multiple pieces according to the respective terminal type. Mounting is possible on a standard DIN rail or on a flat, solid surface. The terminals are available in gray, blue, yellow-green, red or black. The electrical part is made of tinned aluminum and the insulating part is made of polyamide PA66 (flammability class V-0 according to UL 94). The clamping part in the shape of a profile is specially milled to prevent the conductor from being pulled out. The clamping screws are made of tinned aluminum and their contact part is coated with contact paste. A hex socket wrench is required to tighten the clamping screw. The operating temperature is between -25 °C and +80 °C. The protection class of the OTL terminals is IP 20. These terminals are certified according to EN 60947-7-1:2009 and EN 61238-1:2003 and meet the requirements of class A.
    MAA2050A10 Stezaljka ( klema ) dvostruka OTL 50-2 siva 2xAl/Cu 1,5-50mm
    Na lageru: 348
    Kupi
    5 godina garancije MAA2050B10 MAA2050B10 Stezaljka ( klema ) dvostruka OTL 50-2 plav 2xAl/Cu 1,5-50mm Universal OTL terminals are designed for copper and aluminum conductors. The terminals are suitable for all types of Cu or Al conductors with a cross-section of up to 300 mm² in applications up to 1000 V AC / 1500 V DC. Their use is very practical in places where copper and aluminum conductors are connected. Copper conductors can be placed in OTL terminals in multiple pieces according to the respective terminal type. Mounting is possible on a standard DIN rail or on a flat, solid surface. The terminals are available in gray, blue, yellow-green, red or black. The electrical part is made of tinned aluminum and the insulating part is made of polyamide PA66 (flammability class V-0 according to UL 94). The clamping part in the shape of a profile is specially milled to prevent the conductor from being pulled out. The clamping screws are made of tinned aluminum and their contact part is coated with contact paste. A hex socket wrench is required to tighten the clamping screw. The operating temperature is between -25 °C and +80 °C. The protection class of the OTL terminals is IP 20. These terminals are certified according to EN 60947-7-1:2009 and EN 61238-1:2003 and meet the requirements of class A.
    MAA2050B10 Stezaljka ( klema ) dvostruka OTL 50-2 plav 2xAl/Cu 1,5-50mm
    Na lageru: 111
    Kupi
    5 godina garancije MAA2050R10 MAA2050R10 OTL50-2 2xAl/Cu 1,5-50mm2 crvena 1000V univerzalna stezaljka 1P dvostruka Universal OTL terminals are designed for copper and aluminum conductors. The terminals are suitable for all types of Cu or Al conductors with a cross-section of up to 300 mm² in applications up to 1000 V AC / 1500 V DC. Their use is very practical in places where copper and aluminum conductors are connected. Copper conductors can be placed in OTL terminals in multiple pieces according to the respective terminal type. Mounting is possible on a standard DIN rail or on a flat, solid surface. The terminals are available in gray, blue, yellow-green, red or black. The electrical part is made of tinned aluminum and the insulating part is made of polyamide PA66 (flammability class V-0 according to UL 94). The clamping part in the shape of a profile is specially milled to prevent the conductor from being pulled out. The clamping screws are made of tinned aluminum and their contact part is coated with contact paste. A hex socket wrench is required to tighten the clamping screw. The operating temperature is between -25 °C and +80 °C. The protection class of the OTL terminals is IP 20. These terminals are certified according to EN 60947-7-1:2009 and EN 61238-1:2003 and meet the requirements of class A.
    MAA2050R10 OTL50-2 2xAl/Cu 1,5-50mm2 crvena 1000V univerzalna stezaljka 1P dvostruka
    Na lageru: 18
    Kupi
    5 godina garancije MAA2050S10 MAA2050S10 OTL50-2 2xAl/Cu 1,5-50mm2 crna 1000V univerzalna stezaljka 1P dvostruka Universal OTL terminals are designed for copper and aluminum conductors. The terminals are suitable for all types of Cu or Al conductors with a cross-section of up to 300 mm² in applications up to 1000 V AC / 1500 V DC. Their use is very practical in places where copper and aluminum conductors are connected. Copper conductors can be placed in OTL terminals in multiple pieces according to the respective terminal type. Mounting is possible on a standard DIN rail or on a flat, solid surface. The terminals are available in gray, blue, yellow-green, red or black. The electrical part is made of tinned aluminum and the insulating part is made of polyamide PA66 (flammability class V-0 according to UL 94). The clamping part in the shape of a profile is specially milled to prevent the conductor from being pulled out. The clamping screws are made of tinned aluminum and their contact part is coated with contact paste. A hex socket wrench is required to tighten the clamping screw. The operating temperature is between -25 °C and +80 °C. The protection class of the OTL terminals is IP 20. These terminals are certified according to EN 60947-7-1:2009 and EN 61238-1:2003 and meet the requirements of class A.
    MAA2050S10 OTL50-2 2xAl/Cu 1,5-50mm2 crna 1000V univerzalna stezaljka 1P dvostruka
    Na lageru: 54
    Kupi
    5 godina garancije MAA2050Y10 MAA2050Y10 Stezaljka ( klema ) dvostruka OTL 50-2 zu/z 2xAl/Cu 1,5-50mm Universal OTL terminals are designed for copper and aluminum conductors. The terminals are suitable for all types of Cu or Al conductors with a cross-section of up to 300 mm² in applications up to 1000 V AC / 1500 V DC. Their use is very practical in places where copper and aluminum conductors are connected. Copper conductors can be placed in OTL terminals in multiple pieces according to the respective terminal type. Mounting is possible on a standard DIN rail or on a flat, solid surface. The terminals are available in gray, blue, yellow-green, red or black. The electrical part is made of tinned aluminum and the insulating part is made of polyamide PA66 (flammability class V-0 according to UL 94). The clamping part in the shape of a profile is specially milled to prevent the conductor from being pulled out. The clamping screws are made of tinned aluminum and their contact part is coated with contact paste. A hex socket wrench is required to tighten the clamping screw. The operating temperature is between -25 °C and +80 °C. The protection class of the OTL terminals is IP 20. These terminals are certified according to EN 60947-7-1:2009 and EN 61238-1:2003 and meet the requirements of class A.
    MAA2050Y10 Stezaljka ( klema ) dvostruka OTL 50-2 zu/z 2xAl/Cu 1,5-50mm
    Na lageru: 98
    Kupi
    5 godina garancije MAA2095A10 MAA2095A10 Stezaljka ( klema ) dvostruka OTL 95-2 siva 2xAl/Cu 6-95mm2 Universal OTL terminals are designed for copper and aluminum conductors. The terminals are suitable for all types of Cu or Al conductors with a cross-section of up to 300 mm² in applications up to 1000 V AC / 1500 V DC. Their use is very practical in places where copper and aluminum conductors are connected. Copper conductors can be placed in OTL terminals in multiple pieces according to the respective terminal type. Mounting is possible on a standard DIN rail or on a flat, solid surface. The terminals are available in gray, blue, yellow-green, red or black. The electrical part is made of tinned aluminum and the insulating part is made of polyamide PA66 (flammability class V-0 according to UL 94). The clamping part in the shape of a profile is specially milled to prevent the conductor from being pulled out. The clamping screws are made of tinned aluminum and their contact part is coated with contact paste. A hex socket wrench is required to tighten the clamping screw. The operating temperature is between -25 °C and +80 °C. The protection class of the OTL terminals is IP 20. These terminals are certified according to EN 60947-7-1:2009 and EN 61238-1:2003 and meet the requirements of class A.
    MAA2095A10 Stezaljka ( klema ) dvostruka OTL 95-2 siva 2xAl/Cu 6-95mm2
    Na lageru: 232
    Kupi
    5 godina garancije MAA2095B10 MAA2095B10 Stezaljka ( klema ) dvostruka OTL 95-2 plav 2xAl/Cu 6-95mm2 Universal OTL terminals are designed for copper and aluminum conductors. The terminals are suitable for all types of Cu or Al conductors with a cross-section of up to 300 mm² in applications up to 1000 V AC / 1500 V DC. Their use is very practical in places where copper and aluminum conductors are connected. Copper conductors can be placed in OTL terminals in multiple pieces according to the respective terminal type. Mounting is possible on a standard DIN rail or on a flat, solid surface. The terminals are available in gray, blue, yellow-green, red or black. The electrical part is made of tinned aluminum and the insulating part is made of polyamide PA66 (flammability class V-0 according to UL 94). The clamping part in the shape of a profile is specially milled to prevent the conductor from being pulled out. The clamping screws are made of tinned aluminum and their contact part is coated with contact paste. A hex socket wrench is required to tighten the clamping screw. The operating temperature is between -25 °C and +80 °C. The protection class of the OTL terminals is IP 20. These terminals are certified according to EN 60947-7-1:2009 and EN 61238-1:2003 and meet the requirements of class A.
    MAA2095B10 Stezaljka ( klema ) dvostruka OTL 95-2 plav 2xAl/Cu 6-95mm2
    Na lageru: 109
    Kupi
    5 godina garancije MAA2095R10 MAA2095R10 OTL95-2 2xAl/Cu 6-95mm2 crvena 1000V univerzalna stezaljka 1P dvostruka Universal OTL terminals are designed for copper and aluminum conductors. The terminals are suitable for all types of Cu or Al conductors with a cross-section of up to 300 mm² in applications up to 1000 V AC / 1500 V DC. Their use is very practical in places where copper and aluminum conductors are connected. Copper conductors can be placed in OTL terminals in multiple pieces according to the respective terminal type. Mounting is possible on a standard DIN rail or on a flat, solid surface. The terminals are available in gray, blue, yellow-green, red or black. The electrical part is made of tinned aluminum and the insulating part is made of polyamide PA66 (flammability class V-0 according to UL 94). The clamping part in the shape of a profile is specially milled to prevent the conductor from being pulled out. The clamping screws are made of tinned aluminum and their contact part is coated with contact paste. A hex socket wrench is required to tighten the clamping screw. The operating temperature is between -25 °C and +80 °C. The protection class of the OTL terminals is IP 20. These terminals are certified according to EN 60947-7-1:2009 and EN 61238-1:2003 and meet the requirements of class A.
    MAA2095R10 OTL95-2 2xAl/Cu 6-95mm2 crvena 1000V univerzalna stezaljka 1P dvostruka
    Na lageru: 14
    Kupi
    5 godina garancije MAA2095S10 MAA2095S10 OTL95-2 2xAl/Cu 6-95mm2 crna 1000V univerzalna stezaljka 1P dvostruka Universal OTL terminals are designed for copper and aluminum conductors. The terminals are suitable for all types of Cu or Al conductors with a cross-section of up to 300 mm² in applications up to 1000 V AC / 1500 V DC. Their use is very practical in places where copper and aluminum conductors are connected. Copper conductors can be placed in OTL terminals in multiple pieces according to the respective terminal type. Mounting is possible on a standard DIN rail or on a flat, solid surface. The terminals are available in gray, blue, yellow-green, red or black. The electrical part is made of tinned aluminum and the insulating part is made of polyamide PA66 (flammability class V-0 according to UL 94). The clamping part in the shape of a profile is specially milled to prevent the conductor from being pulled out. The clamping screws are made of tinned aluminum and their contact part is coated with contact paste. A hex socket wrench is required to tighten the clamping screw. The operating temperature is between -25 °C and +80 °C. The protection class of the OTL terminals is IP 20. These terminals are certified according to EN 60947-7-1:2009 and EN 61238-1:2003 and meet the requirements of class A.
    MAA2095S10 OTL95-2 2xAl/Cu 6-95mm2 crna 1000V univerzalna stezaljka 1P dvostruka
    Na lageru: 2
    Kupi
    5 godina garancije MAA2095Y10 MAA2095Y10 Stezaljka ( klema ) dvostruka OTL 95-2 zu/z 2xAl/Cu 6-95mm2 Universal OTL terminals are designed for copper and aluminum conductors. The terminals are suitable for all types of Cu or Al conductors with a cross-section of up to 300 mm² in applications up to 1000 V AC / 1500 V DC. Their use is very practical in places where copper and aluminum conductors are connected. Copper conductors can be placed in OTL terminals in multiple pieces according to the respective terminal type. Mounting is possible on a standard DIN rail or on a flat, solid surface. The terminals are available in gray, blue, yellow-green, red or black. The electrical part is made of tinned aluminum and the insulating part is made of polyamide PA66 (flammability class V-0 according to UL 94). The clamping part in the shape of a profile is specially milled to prevent the conductor from being pulled out. The clamping screws are made of tinned aluminum and their contact part is coated with contact paste. A hex socket wrench is required to tighten the clamping screw. The operating temperature is between -25 °C and +80 °C. The protection class of the OTL terminals is IP 20. These terminals are certified according to EN 60947-7-1:2009 and EN 61238-1:2003 and meet the requirements of class A.
    MAA2095Y10 Stezaljka ( klema ) dvostruka OTL 95-2 zu/z 2xAl/Cu 6-95mm2
    Na lageru: 120
    Kupi
    5 godina garancije MAA2150A10 MAA2150A10 Stezaljka ( klema ) dvostruka OTL 150-2 siva 2xAl/Cu 25-150 Universal OTL terminals are designed for copper and aluminum conductors. The terminals are suitable for all types of Cu or Al conductors with a cross-section of up to 300 mm² in applications up to 1000 V AC / 1500 V DC. Their use is very practical in places where copper and aluminum conductors are connected. Copper conductors can be placed in OTL terminals in multiple pieces according to the respective terminal type. Mounting is possible on a standard DIN rail or on a flat, solid surface. The terminals are available in gray, blue, yellow-green, red or black. The electrical part is made of tinned aluminum and the insulating part is made of polyamide PA66 (flammability class V-0 according to UL 94). The clamping part in the shape of a profile is specially milled to prevent the conductor from being pulled out. The clamping screws are made of tinned aluminum and their contact part is coated with contact paste. A hex socket wrench is required to tighten the clamping screw. The operating temperature is between -25 °C and +80 °C. The protection class of the OTL terminals is IP 20. These terminals are certified according to EN 60947-7-1:2009 and EN 61238-1:2003 and meet the requirements of class A.
    MAA2150A10 Stezaljka ( klema ) dvostruka OTL 150-2 siva 2xAl/Cu 25-150
    Na lageru: 209
    Kupi
    5 godina garancije MAA2150B10 MAA2150B10-2 2xAl/Cu 25-150mm2 plava 1000V univerzalna stezaljka 1P dvostruka Universal OTL terminals are designed for copper and aluminum conductors. The terminals are suitable for all types of Cu or Al conductors with a cross-section of up to 300 mm² in applications up to 1000 V AC / 1500 V DC. Their use is very practical in places where copper and aluminum conductors are connected. Copper conductors can be placed in OTL terminals in multiple pieces according to the respective terminal type. Mounting is possible on a standard DIN rail or on a flat, solid surface. The terminals are available in gray, blue, yellow-green, red or black. The electrical part is made of tinned aluminum and the insulating part is made of polyamide PA66 (flammability class V-0 according to UL 94). The clamping part in the shape of a profile is specially milled to prevent the conductor from being pulled out. The clamping screws are made of tinned aluminum and their contact part is coated with contact paste. A hex socket wrench is required to tighten the clamping screw. The operating temperature is between -25 °C and +80 °C. The protection class of the OTL terminals is IP 20. These terminals are certified according to EN 60947-7-1:2009 and EN 61238-1:2003 and meet the requirements of class A.
    MAA2150B10-2 2xAl/Cu 25-150mm2 plava 1000V univerzalna stezaljka 1P dvostruka
    Na lageru: 21
    Kupi
    5 godina garancije MAA2150Y10 MAA2150Y10 MAA2150Y10 Stezaljka ( klema ) dvostruka OTL 150-2 zu/z 2xAl/Cu 25-150 Universal OTL terminals are designed for copper and aluminum conductors. The terminals are suitable for all types of Cu or Al conductors with a cross-section of up to 300 mm² in applications up to 1000 V AC / 1500 V DC. Their use is very practical in places where copper and aluminum conductors are connected. Copper conductors can be placed in OTL terminals in multiple pieces according to the respective terminal type. Mounting is possible on a standard DIN rail or on a flat, solid surface. The terminals are available in gray, blue, yellow-green, red or black. The electrical part is made of tinned aluminum and the insulating part is made of polyamide PA66 (flammability class V-0 according to UL 94). The clamping part in the shape of a profile is specially milled to prevent the conductor from being pulled out. The clamping screws are made of tinned aluminum and their contact part is coated with contact paste. A hex socket wrench is required to tighten the clamping screw. The operating temperature is between -25 °C and +80 °C. The protection class of the OTL terminals is IP 20. These terminals are certified according to EN 60947-7-1:2009 and EN 61238-1:2003 and meet the requirements of class A.
    MAA2150Y10 MAA2150Y10 Stezaljka ( klema ) dvostruka OTL 150-2 zu/z 2xAl/Cu 25-150
    Na lageru: 21
    Kupi
    5 godina garancije MAA2240A10 MAA2240A10 Stezaljka ( klema ) dvostruka OTL 240-2 siva 2xAl/Cu 35-240 Universal OTL terminals are designed for copper and aluminum conductors. The terminals are suitable for all types of Cu or Al conductors with a cross-section of up to 300 mm² in applications up to 1000 V AC / 1500 V DC. Their use is very practical in places where copper and aluminum conductors are connected. Copper conductors can be placed in OTL terminals in multiple pieces according to the respective terminal type. Mounting is possible on a standard DIN rail or on a flat, solid surface. The terminals are available in gray, blue, yellow-green, red or black. The electrical part is made of tinned aluminum and the insulating part is made of polyamide PA66 (flammability class V-0 according to UL 94). The clamping part in the shape of a profile is specially milled to prevent the conductor from being pulled out. The clamping screws are made of tinned aluminum and their contact part is coated with contact paste. A hex socket wrench is required to tighten the clamping screw. The operating temperature is between -25 °C and +80 °C. The protection class of the OTL terminals is IP 20. These terminals are certified according to EN 60947-7-1:2009 and EN 61238-1:2003 and meet the requirements of class A.
    MAA2240A10 Stezaljka ( klema ) dvostruka OTL 240-2 siva 2xAl/Cu 35-240
    Na lageru: 77
    Kupi
    5 godina garancije MAA2240B10 MAA2240B10 Stezaljka ( klema ) dvostruka OTL 240-2 plava 2xAl/Cu 35-240 Universal OTL terminals are designed for copper and aluminum conductors. The terminals are suitable for all types of Cu or Al conductors with a cross-section of up to 300 mm² in applications up to 1000 V AC / 1500 V DC. Their use is very practical in places where copper and aluminum conductors are connected. Copper conductors can be placed in OTL terminals in multiple pieces according to the respective terminal type. Mounting is possible on a standard DIN rail or on a flat, solid surface. The terminals are available in gray, blue, yellow-green, red or black. The electrical part is made of tinned aluminum and the insulating part is made of polyamide PA66 (flammability class V-0 according to UL 94). The clamping part in the shape of a profile is specially milled to prevent the conductor from being pulled out. The clamping screws are made of tinned aluminum and their contact part is coated with contact paste. A hex socket wrench is required to tighten the clamping screw. The operating temperature is between -25 °C and +80 °C. The protection class of the OTL terminals is IP 20. These terminals are certified according to EN 60947-7-1:2009 and EN 61238-1:2003 and meet the requirements of class A.
    MAA2240B10 Stezaljka ( klema ) dvostruka OTL 240-2 plava 2xAl/Cu 35-240
    Na lageru: 36
    Kupi
    5 godina garancije MAA2240Y10 MAA2240Y10 Stezaljka ( klema ) dvostruka OTL 240-2 zu/z 2xAl/Cu 35-240 Universal OTL terminals are designed for copper and aluminum conductors. The terminals are suitable for all types of Cu or Al conductors with a cross-section of up to 300 mm² in applications up to 1000 V AC / 1500 V DC. Their use is very practical in places where copper and aluminum conductors are connected. Copper conductors can be placed in OTL terminals in multiple pieces according to the respective terminal type. Mounting is possible on a standard DIN rail or on a flat, solid surface. The terminals are available in gray, blue, yellow-green, red or black. The electrical part is made of tinned aluminum and the insulating part is made of polyamide PA66 (flammability class V-0 according to UL 94). The clamping part in the shape of a profile is specially milled to prevent the conductor from being pulled out. The clamping screws are made of tinned aluminum and their contact part is coated with contact paste. A hex socket wrench is required to tighten the clamping screw. The operating temperature is between -25 °C and +80 °C. The protection class of the OTL terminals is IP 20. These terminals are certified according to EN 60947-7-1:2009 and EN 61238-1:2003 and meet the requirements of class A.
    MAA2240Y10 Stezaljka ( klema ) dvostruka OTL 240-2 zu/z 2xAl/Cu 35-240
    Na lageru: 40
    Kupi

    Pošaljite upit za


    Korpa - 0
    Do dodavanja u korpu sve cene su sa PDV-om.
    Vaša korpa je prazna
    sirotin.rs koristi kolačiće. Daljim korišćenjem veb adrese sirotin.rs saglasni ste sa korišćenjem kolačića na istoj adresi.
    Positive SSL
    Essential SSL Search icons created by Maxim Basinski Premium - Flaticon Cost effectiveness icons created by Freepik - Flaticon